SCULPFUN S30 Pro Max 20W Laser Engraver Cutter

Highlights

Sculpfun S30 Pro Max Main Features

Sculpfun S30 Pro Max equips a 20W quad-diode laser module with a replaceable protective lens underneath that will make it possible to keep your engraver in top condition for many years!

Sculpfun S30 Pro Max uses the same focusing method as the brand`s models including the Sculpfun S10 and Sculpfun S9. The laser module is held on a sliding rail with thumbscrews on the back. The focusing is done by setting the correct distance between the laser module and the work material with an aluminum focusing block, which sets the distance to 40mm.

The air assist pump of the Sculpfun S30 Pro Max outputs 30 l/min and can be enabled via control software (Lightburn) for only the specified engraving layers. This is great because you can engrave one project that has multiple operations and for example, you can select to turn off the air assist for engraving and turn it on for laser cutting only. The air assist pump already comes with the machine.

• Automatic Air-assist
• 0.08*0.1mm Laser Focus
• 32-bit Motherboard
• Replaceable Lens
• Engraving Size 410*400mm
• Expandable to 935*905mm

Automatically Controlled Air Assist System

Sculpfun S30 series is equipped with an air-assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts.

Built-in High-Pressure Air Assist Nozzle

S30 series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate 30L/min high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist.

Ultra-thin 20W Laser

Adopting ultra-thin laser shaping technology, the laser focus of the S30 series is as thin as hair and very powerful for engraving or cutting. The S30 Pro Max 20W pursues the ultimate cutting speed, suitable for professionals, shops, or factories.

Replaceable Protective Lens

S30 series laser adopts an innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power.

Expandable Engraving Area

The original engraving area is about 410x400mm, while it features XY-axis expandable design, so you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade up to 935x905mm engraving area, which can help you better handle large area engraving or cutting work.

Upgraded 32-bit Air-assist Motherboard

The latest 32-bit motherboard supports automatic air-assist control and reserves Bluetooth, and SD card offline printing function. (Upgrade Kit sold separately)
Industrial-grade Cutting Accuracy Extremely solid and high-precision linear slide rail X-axis make it reach industrial-grade engraving accuracy. When comparing small engraving details, the S30 series does not have the wavy pattern that appears in ordinary engraving machines.

Sturdy and Durable Aluminum Alloy Frame

Made of high-strength aluminum alloy, its frame can bear up to 50 kg weight without damage and is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded.

Safety Design

The presented A4 size steel pad can well protect the table from laser damage. There is an eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency.

Right-angle Measuring Ruler

There are precise scale lines on the X-axis and Y-axis to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraved object.

Note

• 1. Because of the powerful laser power, it is forbidden to run the engraving machine without being supervised. Pause it if you're not around.
• 2. For detailed machine instructions, please refer to the manual for parameter settings.
• 3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
• 4. Do not touch the laser with your hands, otherwise, you may burn your hands.
• 5. Please avoid a strong impact on the machine.
• 6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision.
• 7. Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.

SCULPFUN S30 SERIES

32-Bit Air Assist Mainboard

S30 Series-Five Leading Innovative Technologies

• Limit Switch
• S30 Pro 10W Dual-laser
• Air Assist
• Industrial Grade Linear Rail
• Automatic Air Assist Pump
• X&Y Axis Expansion Kit
• Replaceable Lens
• 32-Bit Airassist Mainboard

High Density and Sharp Laser Beam

20W Powerful Quad-laser Technology

AUTOMATIC CONTROLLED AIR ASSIST

S30 Pro Max is equipped with an air assist 32-bit motherboard and a control-type air pump, which can intelligently control the air assist ON or OFF (Lightburn M8 Air Assist Switch)

Why Automatic Air Assist is Necessary?

Replaceable Lens Super Long Service Life Laser

The S30 Pro Max laser module adopts the leading replaceable lens design. After long-term use or damaged, the lens can be replaced to recover the power. This greatly improves the service life of the laser, which is more than 10 times higher than ordinary lasers.

Laser Repair Kit

SCULPFUN S30 Pro Max provides a free laser repair kit in the package, including a lens, sealing ring, tweezers, screws, and wrench, when your laser has a problem, it can be repaired in time and greatly improve the service life.

Built-in High-Pressure Air Assist Nozzle

S30 Pro Max nozzle has an advanced fluid mechanics design to utilize the air pressure better. When using the same air compressor, the S30 series sprays airflow faster.

Leading XY Axis Expandable Design

SCULPFUN is the leader in XY axis expansion. First, It has a simplified structure and low price. Second, SCULPFUN uses high-precision linear guides to keep high precision while expanding the area. Up to 905x935mm engraving area can meet most needs.

• Standard version
• Y-axis expansion kit (Purchase separately)
• X-axis & Y-axis expansion kit (Purchase separately)

High Precision 0.005mm Industrial Grade Linear Rail

S30 Pro Max adopts the most accurate 0.005mm industrial linear guide, which greatly improves the engraving accuracy, and there is no wave line when engraving.

32-Bit Air Assist Mainboard

S30 series motherboard supports an automatic air assist control function (LightBurn M8 Switch). And reserve Bluetooth, SD card offline control function (sold separately as an upgrade kit).

Support Upgrade to Wireless Connection

S30 Series - Three Power Options

S30 5W: Super high cost-performance, meet 90% of hobby needs

S30 Pro 10W: Suitable for people who often cut, do everything faster

S30 Pro Max 20W: Pursuing the ultimate cutting speed, for professionals, shop or factory

20W laser Power

• 18mm thick wood
• 15mm thick acrylic
• 0.05mm thick metal

S30 Series Upgrade Accessories (Sold separately)

Limit Switch in Package

S30 Pro Max comes with an XY limit switch device in the package to achieve a homing or positioning function, which is very helpful for repeated positioning. Users can choose to install or not to install according to their own needs, which does not affect the use

Automatic Air Pump in Package

The S30 Pro Max comes with an automatic air pump in the package, which is very durable and can output 30L/min of airflow steadily. It works with the 32-bit Air Assist Mainboard to realize automatic air assist (Lightburn M8 Air Assist)

Protective Eye Shield

Specification

Sculpfun S30 Pro Max Recommended Settings